Universal priming system

BANNOH series are CMP’s anti-corrosive protections for vessels, bridges and other steel structures.
For vessels, BANNOH provides excellent protection against corrosion in water ballast tank (WBT), under water hull includes splash zone and abrasive area and all of weather exposed area. Needless to say, internal area also can be. Therefore BANNOH series are named as Universal priming system.


bannoh_img2.jpg

Block stage (Outside shell)         BANNOH 1500


bannoh_img3.jpg

W.B.Tank: Final coat        BANNOH 1500 (Light Grey)

Flexibility – Optimized Design with Polymer Technology

To be an enhanced anti-corrosive primer, BANNOH series have been succeeding ideas on its formulation. The combination with selection of pigments and polymer technique based on CMP’s long experience provides superior performance and satisfaction.
More than 60,000 vessels has been coated by BANNOH all over the world, they are prove for its anti-corrosive performance supported by the techniques.

Flexure of vessels

Vessels on the ocean are always exposed to the risks of bending and torsion by “loaded cargoes” or “sea waves”. Steel hull structure also bends and twists itself and it may lead to Cracking of coatings. Therefore, flexibility is essential property for marine anti-corrosive coating.

bannoh_img5.jpg
bannoh_img6.jpg
bannoh_img7.jpg

※Image: When steel structure is bending like above picture, coating film needs to extend itself to follow bent of steel.

Comparison Test - Result

To be intact on flexible steel hull, BANNOH provides excellent flexibility (please see picture below).

(Mandrel Bending Test / ASTM D 522 / 1 inch Roll / 320μm)


bannoh_img79.jpg

※Test method: Apply 320μm test coating film on steel plate and bend it like this.

Product Line

IMO* :  International Maritime Organization          PSPC** :  Performance Standard for Protective Coatings

BANNOH 500

Since its launch in 1990s, BANNOH 500 has been standard AC in Japanese shipyards. More than 50,000 vessels have been coated by BANNOH 500 all over the world.
IMO* PSPC** for WBT & COT (cargo oil tank) regulation complied.

BANNOH 1500

In addition to BANNOH 500’s huge experiences, BANNOH 1500 launched with its smoother surface technology. 73% high solid volume meets global environmental requirements.
IMO* PSPC** for WBT & COT (cargo oil tank) regulation complied.

BANNOH 2000

80% solid volume type for new shipbuilding in South Korea.
IMO* PSPC** for WBT & COT (cargo oil tank) regulation complied.

BANNOH 3000

72% solid volume type with 9% aluminum pigment.
IMO* PSPC** for WBT regulation complied.

BANNOH 4000

80% solid volume type with 9% aluminum pigment.
IMO* PSPC** for WBT regulation complied.

BANNOH 5000

Solvent free = 100% solid volume type.

ページトップへ戻る

© Copyright 2018 Chugoku Marine Paints, Ltd. All Rights Reserved.